Comparative investigations of LiVPO4F/C and Li3V2(PO4)3/C synthesized in similar soft chemical route

Triclinic LiVPO₄F and monoclinic Li₃V₂(PO₄)₃ are synthesized through a soft chemical process with mechanical activation assist, followed by annealing. In this process, ascorbic acid is used as reducing agent as well as carbon source. The as-prepared samples are coated with amorphous carbon. XPS analysis results show the expected valency states of ions in LiVPO₄F and Li₃V₂(PO₄)₃. The electrochemical properties of the prepared LiVPO₄F/C and Li₃V₂(PO₄)₃/C cathodes are evaluated. The as-prepared LiVPO₄F/C cathode shows an initial discharge specific capacity of 140?±?3 mAh?g^?1 at 30 mA?g^?1 in the voltage range of 3.0~4.4 V, compared with that of 138?±?3 mAh?g^?1 possessed by Li₃V₂(PO₄)₃/C. Both samples exhibit good cycle performance at different current densities. The capacity delivered by LiVPO₄F remains 95.5 and 91.7 % of its initial discharge capacity after 50 cycles at 150 and 750 mA?g^?1, respectively, while 97.4 and 90.6 % for Li₃V₂(PO₄)₃/C. But the rate capability of LiVPO₄F/C is not so good compared with as-prepared Li₃V₂(PO₄)₃/C.     

Tuning Nanoparticle Catalysis for the Oxygen Reduction Reaction

Advances in chemical syntheses have led to the formation of various kinds of nanoparticles (NPs) with more rational control of size, shape, composition, structure and catalysis. This review highlights recent efforts in the development of Pt and non‐Pt based NPs into advanced nanocatalysts for efficient oxygen reduction reaction (ORR) under fuel‐cell reaction conditions. It first outlines the shape controlled synthesis of Pt NPs and their shape‐dependent ORR. Then it summarizes the studies of alloy and core–shell NPs with controlled electronic (alloying) and strain (geometric) effects for tuning ORR catalysis. It further provides a brief overview of ORR catalytic enhancement with Pt‐based NPs supported on graphene and coated with an ionic liquid. The review finally introduces some non‐Pt NPs as a new generation of catalysts for ORR. The reported new syntheses with NP parameter‐tuning capability should pave the way for future development of highly efficient catalysts for applications in fuel cells, metal‐air batteries, and even in other important chemical reactions.     

How Strain Affects the Reactivity of Surface Metal Oxide Catalysts

Highly dispersed molybdenum oxide supported on mesoporous silica SBA‐15 has been prepared by anion exchange resulting in a series of catalysts with changing Mo densities (0.2–2.5 Mo atoms nm^?2). X‐ray absorption, UV/Vis, Raman, and IR spectroscopy indicate that doubly anchored tetrahedral dioxo MoO₄ units are the major surface species at all loadings. Higher reducibility at loadings close to the monolayer measured by temperature‐programmed reduction and a steep increase in the catalytic activity observed in metathesis of propene and oxidative dehydrogenation of propane at 8 % of Mo loading are attributed to frustration of Mo oxide surface species and lateral interactions. Based on DFT calculations, NEXAFS spectra at the O‐K‐edge at high Mo loadings are explained by distorted MoO₄ complexes. Limited availability of anchor silanol groups at high loadings forces the MoO₄ groups to form more strained configurations. The occurrence of strain is linked to the increase in reactivity.     

A Highly Selective Colorimetric Sensor for Cu2+ Based on Phenolic Group Biscarbonyl Hydrazone

A novel copper selective sensor 2 based on hydrazide and salicylaldehyde has been designed and prepared. Sensor 2 behaves a single selectivity and sensitivity in the recognition for Cu²⁺ over other metal ions such as Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ni²⁺, Co²⁺, Cr³⁺ and Mg²⁺ in DMSO. The distinct color change and the rapid changement of fluorescence emission provide naked‐eyes detection for Cu²⁺. The UV‐vis data indicate that 1:2 stoichiometry complex is formed by sensor 2 and Cu²⁺. The association constant K_s was 3.51×10⁴ mol^?1·L. The detection limitation of Cu²⁺ with the sensor 2 was 2.2×10^?7 mol·L^?1. The sensing of Cu²⁺ by this sensor was found to be reversible, with the Cu²⁺‐induced color being lost upon addition of EDTA.     

Synthesis, Characterization and Properties of Novel Star-Shaped π-Conjugated Oligomers with Triphenylamine Core

Four new star‐shaped π‐conjugated oligomers ( TPA‐CZ3 , TPA‐TPA3 , TPA‐PTZ3 and TPA‐BT3 ) with triphenylamine as a core and different electron‐donating ability groups, carbazole, triphenylamine, phenothiazine and bithiophene, as peripheral units have been designed and synthesized via the Heck reaction. These oligomers show good solubility in common organic solvents. Their photophysical, electrochemical, electronic structure and charge transfer properties between these star‐shaped π‐conjugated oligomers and N,N′‐bis(1‐ethylpropyl)‐3,4:9,10‐perylene bis(tetracarboxyl diimide) (EP‐PDI) have been investigated by UV‐vis absorption spectra, photoluminescence (PL) spectra, cyclic voltammetry (CV) measurement, theoretical calculations and fluorescence quenching. The results show that the absorptions and fluorescences of TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 are red shifted with the electron‐donating ability of the peripheral unit increasing from carbazole to triphenylamine and phenothiazine. In addition, although the bithiophene group has a weaker electron‐donating ability than carbazole, triphenylamine and phenothiazine, the absorption and fluorescence of TPA‐BT3 have a red shift than those of TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 because TPA‐BT3 has a longer conjugation length than TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 . The triphenylamine core and the peripheral units can constitute a large conjugated structure. The fluorescence quenching properties indicate that efficient charge transfer can happen between the star‐shaped oligomers and EP‐PDI.     

Theoretical Study on the Hydrogen Bonding Interactions in Complexes of 5‐Hydroxytryptamine with Water

The energies, geometries and harmonic vibrational frequencies of 1:1 5‐hydroxytryptamine‐water (5‐HT‐H₂O) complexes are studied at the MP2/6‐311++G(d,p) level. Natural bond orbital (NBO), quantum theory of atoms in molecules (QTAIM) analyses and the localized molecular orbital energy decomposition analysis (LMO‐EDA) were performed to explore the nature of the hydrogen‐bonding interactions in these complexes. Various types of hydrogen bonds (H‐bonds) are formed in these 5‐HT‐H₂O complexes. The intermolecular C4H5^5‐HT···O^w H‐bond in HTW3 is strengthened due to the cooperativity, whereas no such cooperativity is found in the other 5‐HT‐H₂O complexes. H‐bond in which nitrogen atom of amino in 5‐HT acted as proton donors was stronger than other H‐bonds. Our researches show that the hydrogen bonding interaction plays a vital role on the relative stabilities of 5‐HT‐H₂O complexes.     

茚三酮衍生高效毛细管电泳法测定纯奶中的甘氨酸含量

建立了茚三酮衍生高效毛细管电泳法测定纯奶中甘氨酸含量的方法,该法可选择性测定甘氨酸含量。使用氯化镁为蛋白沉淀剂,沉淀效果较好,研究了甘氨酸–茚三酮聚合物衍生条件,确定最佳实验条件为:未涂层弹性石英毛细管柱(60 cm×75μm,有效长度49 cm),分离缓冲溶液为3.5 mmol磷酸二氢钾–8.2 mmol磷酸氢二钠(pH 6.8),检测波长为570 nm,电泳电压为25 kV,进样压力为25 kPa,进样时间为3 s,电泳温度为室温。甘氨酸的线性范围为2.00~200.00μg/mL,检出限为0.14μg/mL,线性相关系数不小于0.999。甘氨酸的加标回收率为88.7%~107.2%,测定结果的相对标准偏差为2.9%~4.2%(n=6)。该法简便、快速、准确,可用于测定纯奶中甘氨酸含量。     

Electrocatalytic oxidation and the mechanism of dopamine on a MWNT-modified glassy carbon electrode

The electrochemical behavior of dopamine (DA) at a MWNTs-modified glassy carbon electrode was investigated by cyclic voltammetry (CV), square wave voltammetry (SWV). The MWNTs modified electrode exhibited marked promotion of the electrochemical reaction of DA in different environments. Under optimum conditions, the peak currents of SWV of DA were increased linearly with incremental concentration of DA in the range from 5 × 10^?7 to 1 × 10^?5 mol L^?1. The limit of detection is 3 × 10^?7 mol L^?1.